Creative Embroidering
158
> Tap «Multi-colored Embroidery Design On/Off».
–
The embroidery design is embroidered in one color.
Color Indication
Every color of the embroidery design can be selected individually. The hoop moves to the first stitch of the
current color. The currently active color can be embroidered individually or in another sequence.
> Select the embroidery design.
> Tap «Embroidery».
> Touch the icon Scroll up to select the previous color of the embroidery design.
15.10 Freearm Embroidery
Free arm embroidering is defined as embroidering tubular fabrics or garments which are positioned around
the free arm of the embroidery machine while being embroidered. Often used with sleeves, pant legs or
other narrow-tailored garments.
A fabric tube can be conveniently placed around the freearm of the machine if the embroidery hoop is
moved to the left into the park position before attaching or removing it. To return the hoop to the
embroidery position afterwards, push the button «Start/Stop».
If possible, use a full bobbin as the embroidery hoop must be removed when the bobbin is changed.
The movability of the embroidery arm can be limited or impeded with very narrow tubes. Therefore please
make sure that the embroidery hoop can move forwards and backwards sufficiently. An impediment of the
embroidery arm caused by a tube which is too tight can result in embroidery design offset or in damaging
the fabric.
Check the Movability of the Freearm
Please note: With tiny fabric tubes, deactivate the thread-away in the Setup Program if necessary.
> Open the embroidery design on the machine and edit as desired.
> Mark the embroidery design position and the size on the fabric in a suitable way.
> Select the embroidery hoop as small as possible.
> Hoop or stick the fabric along with the appropriate stabilizer in the embroidery hoop, depending on the
stabilizer.
> Pull the fabric tube carefully over the freearm of the machine and attach the embroidery hoop at the
clutch of the embroidery module.
> If necessary, reposition the embroidery design.
check
> Tap «Check Embroidery Design Size».
> After the successful check of the embroidery design size, start the embroidery process.
– Detailed instructions about embroidery, the use of suitable materials or selecting the required
embroidery settings of the machine can be found in the “Tutorial” under embroidery techniques -->
Embroidering.
Summary of Contents for 570 QE
Page 1: ...BERNINA 570 QE User Manual...
Page 2: ......
