Setup Program
66
Calibrating the Buttonhole Foot #3A
The Buttonhole Foot with Slide #3A is calibrated to the machine and they should only be used both together.
Prerequisite:
•
The Buttonhole Foot with Slide #3A is fitted.
•
The needle is not threaded.
> Tap «Home».
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Maintenance/Update».
> Tap «Calibrating the Buttonhole Foot #3A».
> To start the calibration, push the button «Start/Stop».
–
When the calibration is complete, the result is shown in the display.
Packing the Embroidery Module
To pack the embroidery module into the original packaging without moving the embroidery arm manually,
the embroidery arm needs to be brought to its packing position.
Prerequisite:
•
The embroidery module is connected with the machine.
> Tap «Home».
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Maintenance/Update».
> Tap «Packing Position».
> Follow the instructions on the display.
Summary of Contents for 570 QE
Page 1: ...BERNINA 570 QE User Manual...
Page 2: ......
