Buttonholes
108
60
Button Sew-on Program
Sews buttons with 2 or 4 holes.
61
Eyelet with Small Zigzag
Openings for cords or narrow ribbons
and for decorative work.
62
Eyelet with Straight Stitch
Openings for cords or narrow ribbons
and for decorative work.
63
Heirloom Buttonhole
For handlook stitching effects on clothes
and handicrafts on light to medium-
weight fabrics.
64
Double-rounded Buttonhole
For medium-weight to heavy fabrics
made from different fabrics.
65
Double-rounded Heirloom
Buttonhole
For light to medium-weight woven
fabrics, e.g. blouses, dresses and
bedlinen.
67
Round Buttonhole with
Bartack
For medium-weight woven fabrics, e.g.
blouses, dresses and jackets.
69
Decorative Buttonhole with
Double Pointed Bartack
For decorative buttonholes in firmer,
non-elastic fabrics.
9.2 Making Use of the Height Compensation Tool
When a buttonhole is to be sewn at right angles to the project edge, it is recommend to use the height
compensation plates (optional accessory).
> Place the plates from the back between the sewing project and the bottom of the slide to the thick part
of the sewing project.
> Lower the presser foot.
9.3 Using the Compensation Plate
For sewing a buttonhole in problematic fabrics, it is recommended to use the Height Compensation Tool
(optional accessory). The Height Compensation Tool can be used in combination with the Buttonhole Foot
with Slide #3A.
Summary of Contents for 570 QE
Page 1: ...BERNINA 570 QE User Manual...
Page 2: ......
