Decorative stitches
120
7.4 Tapering
Overview Tapering
1
2
3
4
5
6
7
8
9
10
1
Programming length
6
Determining the length manually
2
Pattern repeat
7
Selecting kind of tapering
3
Adjusting the length
8
Backstepping
4
Mirror image left/right
9
Saving settings of stitch patterns
5
Balance
10
Back to default setting
Altering points of a stitch pattern
Tapering is a technique in which the stitch patterns come to a point at the beginning and the end. Four
different points are pre-programmed. In addition to that, the points of stitch patterns can also be determined
manually.
> Touch the icon «Decorative stitches».
> Select a stitch pattern of the Categorie 1400.
> Touch the icon «i»-Dialog.
> Touch the icon «Select type of tapering».
> Select the desired point of the stitch pattern in the right portion of the display.
> Touch the icon «Determine the length manually» to adjust the points of the stitch pattern individually.
> Touch the icons «-» or «+» in the upper right portion of the display to alter the points of the stitch
pattern.
man
