Contents
6
2.6
Feed dog
41
Adjusting the feed dog
41
2.7
Slide-on table
42
Using the slide-on table
42
Attaching the seam guide
42
2.8
Presser foot
43
Adjusting the presser position via the knee lifter of the Free Hand System
43
Adjusting the presser foot position via the button «Presser foot up/down»
43
Changing the presser foot
43
Selecting the presser foot in the user interface
43
Adjusting the presser foot pressure
44
2.9
Adjusting the feed dog
44
2.10
Needle and stitch plate
45
Changing the needle
45
Selecting the needle in the User Interface
45
Selecting needle type and needle size
45
Adjusting the needle position up/down
46
Adjusting the needle position left/right
46
Needle stop up/down (permanent)
46
Changing the stitch plate
47
Selecting the stitch plate in the User Interface
47
2.11
Threading
47
Threading the upper thread
47
Threading the double needle
50
Threading the triple needle
51
Winding the bobbin thread
51
Threading the bobbin thread
52
Indicating fill level of bobbin thread
55
3 Setup Program
56
3.1
Sewing settings
56
Adjusting the upper thread tension
56
Adjusting the maximum sewing speed
56
Programming the securing stitches
56
Adjusting the hovering height of the presser foot
57
Programming the button «Pattern end»
57
Programming the button «Thread cutter»
58
Adjusting the presser foot position with needle stop down
58
Programming the button «Quick reverse»
59
Programming the button «Securing»
59
Programming the foot control
60
3.2
Embroidery settings
60
Adjusting the upper thread tension
60
Adjusting the maximum embroidering speed
61
Centering or opening embroidery motifs in the original position
61
Calibrating the embroidery hoop
61
Entering the fabric thickness
62
Function thread removal on/off
62
Programming the securing stitches
63
Adjusting the thread cut
63
