Mastering
Your
BERNINA
®
BERNINA
®
Embroidery
Module/Machine
M
ASTERING
Y
OUR
BERNINA
®
E
MBROIDERY
M
ODULE
/M
ACHINE
66
Notes
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Changing Lettering Height
(Deco
330 and
artista
200E only)
artista 200E
Open the alphabet folders; select the Drifter alphabet. Enter the word
BERNINA; touch OK. Select the Medium Hoop.
Duplicate BERNINA to create a total of five copies. Use the Move Motif
and Retrieve functions to arrange the words as shown in the illustration.
Select the BERNINA at the top of the hoop. Touch the Letter Manipulation
symbol and change the Letter Height to 6mm. Touch OK. Use the posi-
tioning functions to move the word to Stitch Length knob = +500, Stitch
Width knob = 0.
Repeat this process for each BERNINA as indicated below:
Note: Stitch Width knob position = 0 for all words.
1st BERNINA
Height = 6mm
Stitch Length knob = +500
2nd BERNINA
Height = 10mm
Stitch Length knob = +350
3rd BERNINA
Height = 14mm
Stitch Length knob = +150
4th BERNINA
Height = 18mm
Stitch Length knob = -100
5th BERNINA
Height = 20mm
Stitch Length knob = -400
When the lettering combination is complete, touch OK.
Stitch. Trim and mount sample on following page.
Embroidery Motif
Deco
330
Gothic
artista
165E
n/a
artista
185E
n/a
artista
200E
Drifter
Fabric & Stabilizer
8” x 10” rectangle
Deco 330
Select Alphabet tab. Select small font size. Program
BERNINA
; touch
OK. Move word up.
Select Alphabet tab. Select medium font size. Program
BERNINA
: touch
OK. Move up.
Select Alphabet tab. Select large font size. Program
BERNINA
; touch
OK. Position as needed.
Embroider. Return carriage to stored position. Trim and mount sample.