Remove the presser foot holder, and attach
the darning foot to the presser foot holder
bar.
The lever (a) should be behind the needle
clamp screw (b). Press the darning foot on
firmly from behind with your index finger and
tighten the screw (c).
First sew around the edges of the hole (to
secure the threads). Working from left to
right, sew over the hole in a constant and
continuous movement.
Turn the work by 1/4 (90 ) and sew over the
first stitching moving the work slower over
the hole to separate the threads and not
form big gaps between the threads.
°
Darning
3.5~5.0
Free Motion Darning, Embroidery and Monogramming
Please Note:
Free motion darning is accomplished without
the sewing machine internal feed system.
Movement of the fabric is controlled by the
operator. It is necessary to coordinate
sewing speed and movement of fabric.
Move the drop feed control to "
" to
lower the feed dogs.
55
a
b
a
b
a
a
Basic Sewing Procedures
a
b
c
