My
BERNINA
12
B E R N I N A O V E R L O C K E R W O R K B O O K
STITCH VIEW
There are no physical knobs for the Stitch Length and Differential Feed settings on the L 890. These settings are
changed electronically through the Touch Screen Navigation from the Stitch View screen. The setting will start
at the preset default for the stitch selected. To change the setting, touch either icon and the adjustment screen
will appear.
Needle Stop Up/Down and Maximum Sewing Speed
There are two settings that can be changed from the Stitch View screen that have direct influence
on the machine—meaning that the adjustment will remain as selected for every stitch to follow.
These are the Needle Stop Up/Down and the Maximum Sewing Speed. Needle Stop Up/Down works
like a toggle and will change with a tap. Selecting Maximum Sewing Speed will open a screen with a Slider Control and Fine
Adjustment icons.
Tip:
Remember the sewing speed can also be set in the machine Setup Screen. From the Stitch View Screen, only the top
speed can be changed and this change will also translate into the Setup Screen. Think of it as quick access to sewing speed.
Stitch Length and Differential Feed
The settings for Stitch Length and Differential Feed can be adjusted using the Slider Control, or for fine adjustments using
the <+>and <-> icons. In addition, from this screen you can launch an animation that illustrates the changes to the stitch as
various adjustments are made. If a change has been made to the setting, the number will appear in yellow.
Stitch Length is adjustable from 0.8 mm-4.5 mm.
Differential Feed is adjustable from 0.7-2.
All these setting have direct influence only on the stitch selected—meaning the settings are for this stitch only. If you have
a setting that you will use often, consider saving it in the Personal Memory function of the machine (page 23).
