18
EN
BASIC MAINTENANCE
REMOVING THE SIDE GUIDES
• Identify the two hooks at the bottom of the guide
assembly and pull them gently downwards.
• Pull the guide assembly away from the side
of the oven and remove by pulling the upper
hooks of the assembly upwards from the side
of the oven.
• Remove the side guide assembly from the
oven.
REPLACING THE OVEN LIGHT
Warning!
Isolate the oven's power supply before
changing the light bulb. DO NOT touch the
bulb with your bare hands.
Oven side light (where fi tted)
Bulb type: G9 halogen, 220 V, 40 W
• Ensure that the oven is off and cool.
• If necessary, remove the side guides from the
oven.
• Slide the tip of a fl at-head screwdriver between
the glass cover and the bulb housing.
• Gently turn the tip of the screwdriver to loosen
the glass while keeping it in position with your
fi ngers to prevent it falling and breaking.
• Remove the glass and take out the old halogen
bulb.
• Insert a new halogen bulb in the holder. DO
NOT touch the bulb with your bare hands.
• Press the glass cover back on and reposition
the side guide assembly.
• Refi t the side guide.
• Reinstate the power supply.
Upper oven light (where fi tted)
Bulb type: G9 halogen, 220 V, 40 W
• Ensure that the oven is off and cool.
• Unscrew the glass cover and take out the old
halogen bulb.
• Insert a new halogen bulb in the holder. DO
NOT touch the bulb with your bare hands.
• Screw the glass cover back on.
• Reinstate the power supply.
/ Maintenance
