BEFORE OPERATING
Before operating your new Microwave make sure you read
and understand this Use and Care Guide completely.
The following steps
MUST
be taken before any functions can
be used. Before you use the over the range microwave:
1. Plug in the Microwave.
WELCOME PRESS CLEAR AND PRESS
CLOCK
will appear.
2. Touch the
STOP/CLEAR
pad.
:
will appear.
3. Set clock.
TO SET THE CLOCK
1. Touch
TIMER/CLOCK
pad and number
2
.
2. Enter the correct time of day by touching the numbers in
sequence. Touch
TIMER/CLOCK
pad again.
This is a 12 hour clock. If you attempt to enter an incorrect
clock time,
ERROR
will appear in the display. Touch the
STOP/
CLEAR
pad and re-enter the time.
• If the electrical power supply to your over the range
microwave should be interrupted, the display will
intermittently show
WELCOME PRESS CLEAR AND PRESS CLOCK
after the power is reinstated. If this occurs during cooking,
the program will be erased. The time of day will also be
erased. Simply touch
STOP/CLEAR
pad and reset the
clock for the correct time of day.
STOP/CLEAR
Touch the
STOP/CLEAR
pad to:
• Erase if you make a mistake during programming.
• Cancel timer.
• Stop the over the range microwave temporarily during
timed cooking.
• Return the time of day to the display.
• Cancel a program during cooking, touch twice.
TIME COOKING
Your over the range microwave can be programmed for 99
minutes 99 seconds (99.99). Always enter the seconds after
the minutes, even if they are both zeros.
Cook for 5 minutes at 100%
1. Enter cooking time
500
.
2. Touch
START/ADD A MINUTE
pad.
TO SET POWER LEVEL
There are eleven preset power levels.
Using lower power levels increases the cooking time, which is
recommended for foods such as cheese, milk and long slow
cooking of meats. Consult a microwave cookbook or recipes
for specific recommendations.
Defrost for 5 minutes at 30%
1. Enter defrost time
500
.
2. Touch
POWER LEVEL
8 times.
3. Touch
START/ADD A MINUTE
.
Touch Power Level pad num-
ber of time for desired power
Approx. % of
Power
Common words for
Power Levels
Power Level x 1
100%
High
Power Level x 2
90%
Power Level x 3
80%
Power Level x 4
70%
Medium High
Power Level x 5
60%
Power Level x 6
50%
Medium
Power Level x 7
40%
Power Level x 8
30%
Med Low/Defrost
Power Level x 9
20%
Power Level x 10
10%
Low
Power Level x 11
0%
8
9
OTX_Use & Care.indd 8
2/25/11 8:15 AM
