10
Pan detection
The pan detection ensures a perfect safety. The induction doesn’t work: :
•
If there is no pan on the heating zone or if this pan is not adapted to the induction. In this case
it is impossible to increase the power and the display shows [ U ]. This symbol disappears
when a pan is put on the heating zone.
•
If the pan is removed from the heating zone the operation is stopped. The display shows [ U ].
The symbol [ U ] disappears when the pan is put back to the heating zone. The cooking
continues with the power level set before.
After use, switch the heat element off: don’t let the pan detection [ U ] active.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still hot
and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put any
heat sensitive object on them.
There are risks of burn and fire.
Timer
The timer is able to be used simultaneous with all heating zones and this with different time settings
(from 0 to 99 minutes) for each heating zone.
•
Setting and modification of the cooking time :
Action
Control panel
Display
Zone selection
Press selection zone key
[ 0 ]
Increase power
Press key [ + ]
[ 1 ] to [ 9 ]
To select « Timer »
Press simultaneously [ - ] and [ + ]
Timer [ 00 ] min
Decrease the time
Press key [ - ]
[ 00 ] wents to 30,29…
Increase the time
Press key [ + ]
time increase
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts until the time reaches [ 00 ].
•
To stop the cooking time :
Action
Control panel
Display
Zone selection
Press selection zone key
[ 0 ]
To select « Timer »
Press simultaneously [ - ] and [ + ]
The remaining time
To stop the « Timer »
Press key [ - ]
[ 00 ] then stops
If several timers are activated repeat the process.
•
Automatic stop at the end of the cooking time :
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press any key.
Summary of Contents for P603IC1B2GNEE
Page 2: ......
Page 72: ...26064 3 ...
