13
Power Management
The hob is equipped with a power limitation. If you reach the maximum power it will be impossible to
increase the power on the different cooking zones and a beep signal will sound.
- For the 4 cooking zones, the limitation is set at 7400 W by the factory but it is possible to
change it to 3700 W, 4800 W or 5600 W.
- For the 3 cooking zones, the limitation is set at 5550 W by the factory but it is possible to
change it to 3700 W or 4800 W.
Power limitation configuration
Before beginning the procedure:
•
Make sure there is no more pot on the hob
•
Disconnect the appliance from the grid by removing the fuse or turning the circuit breaker off.
•
Reconnect the table to the grid
•
Start the procedure within 2 minutes after reconnecting the hob to the grid
•
Make sure all cooking zones are off.
Procedure:
To set the power limitation, you must:
1) Press simultaneously the two key of the
bottom zones during 3 seconds. A beep
will sound and the current power is
displayed.
2) To set the power limitation use the [ + ] and [ - ]. To exit the procedure without saving your
changes, don’t touch any key for 60 seconds.
3) To save the new power limitation, re-press the two key of the bottom zones during 3 seconds.
Once the new limitation registered, a beep will sound.
Summary of Contents for P603IC1B2GNEE
Page 2: ......
Page 72: ...26064 3 ...
