23
USA
When the oven is working...
Interrupting a cooking cycle
You can stop the cooking process at any time
by pressing the
Stop
key once or by opening
the oven door.
In both cases:
•
Microwave
emission
is
stopped
immediately.
•
The grill is de-activated but is still very hot.
Danger of burning!
•
The timer stops and the
display
show the
remaining amount of operating time.
If you wish, at this time you can:
1. Turn or stir the food to ensure it will be
evenly cooked.
2. Change the process parameters.
3. Cancel the process by pressing the
Stop
key.
To restart the process, close the door and
press the
Start
key
Altering parameters
The
operating
parameters
(time
and
temperature) can only be altered when the
cooking process has been interrupted by
proceeding as follows:
1. To alter the time, press key
“
-
” and “
+
”.
The new time defined is immediately valid.
2. To alter the power, press the Power
Selection key. The display and respective
light start to flash. Alter the parameter by
pressing the
“
-
” and “
+
” keys and confirm
by pressing the Power Selection key
again.
Cancelling a cooking cycle
If you wish to cancel the cooking process,
press the
Stop
key twice.
You will then hear a beep and the blinking dots
“:” will appear on the
display
.
End of a cooking cycle
At the end of the process you will hear three
beeps and the display will show the word
“
End
”.
The beeps are repeated every 30 seconds until
the door is opened or the
Stop
key is pressed.