1. Turn the cylinder on by slowly turning the cylinder valve counterclockwise.
2. Turn the BURNER control knob to START/HI
3. You will hear the electronic ignition sparking.
4. Check that the burner is lit by looking through the front of the oven or through the
TO EXTINGUISH
Turn burner control knob clockwise to the OFF position. Turn the gas supply OFF at the source.
Guidance For Assembly & Operation Instructions
This guidance is mainly based on standards: BSEN 498:2012 an dBSEN 484:1998
This guidance indicates both mandatory and suggestive clauses which will be indentified
in the following text.
1: EN 498:1997:
Specification for dedicated liquefied petroleum gas appliances -
Barbecues for outdoor use.
2. EN 484:1997:
Dedicagted liquefied petroleum gas appliances - Independent hotplates,
including those incorporating a grill for outdoor use.
Summary of Contents for Bertello One
