18
82.321-M - Pulvasol 1 and 2 / Pulvigne
RINSING THE EQUIPMENT
RINSING THE SPRAYING CIRCUIT WITH THE RINSING TANK
- Sprayer off.
- Disconnect the power take-off.
- Plugs (1) in position
, (figure 6).
- Valve (2) in position
(figure 6).
- Valves (V2) in position
(figure 7) (600 L).
- Valves (V3) in position
(figure 7) (600 L).
- Valves (6) in position
(figure 7) (800 L).
- Run at low speed at
150 rpm max.
- Engage the tractor power take-off and run until the rinsing tank is empty.
This operation is not sufficient for a product change.
RINSING THE SPRAYING CIRCUIT WITH THE MAIN TANK
In the case of a product change.
- Sprayer off.
- Put 300 litres of clear water into the main tank with a ALL CLEAR type cleaning product.
- Plugs (1) in position
, (figure 6).
- Valve (2) in position
(figure 6).
With rinsing tank option:
- Valves (V2) in position
(figure 7) (600 L).
- Valves (V3) in position
(figure 7) (600 L).
- Valves (6) in position
(figure 7) (800 L).
- Run at low speed at
150 rpm max.
- Engage the tractor power take-off and run until the tank is empty.
Summary of Contents for PULVASOL 200
