23
82.321-M - Pulvasol 1 and 2 / Pulvigne
It is also important to rinse the sprayer on the outside as well as the tractor. This cleaning is also essential on
the same day between two applications of different products.
PROCEDURE:
- Remove the filters.
- Fill the tank to 20 % full with water and add detergent (All Clear, reference 771.053, 1 litre can or 778.886,
5 litres can).
- Operate the sprayer for a short period.
- Rock the sprayer by moving tractor forward and backward with a view to agitation water into the tank.
- Leave mixture to act for 12 - 24 hours.
- Start the agitation and moving tractor forward and backward several times, then empty using the drain valve.
- Put some clean water into the tank.
- Unscrew a nozzle, remove insert and plug, at the end of each boom element.
- Rinse with clean water.
- Remove all nozzles and filters, and clean them.
- Reassemble.
- See chapter "Servicing the boom".
- The sprayer should be wintered in a clean condition (see above).
- Completely drain the liquid circuit, making sure that the pump is not operated too long without water
(2 minutes maximum).
- Grease all mechanical parts that can be rust.
- Deoxidize the contacts on the power plugs (BERTHOUD reference 765.065 the KF F2 aerosol).
- Clean the outside of the machine. Paint the mechanical parts exposed (BERTHOUD reference 769.077 for
the blue paint aerosol or 778.890 for the green paint aerosol).
- Garage the machine out of the sunlight and protected against inclement weather and on flat, load-bearing
ground.
MAINTENANCE AFTER OPERATION
WINTER STORAGE
For further information about the spray boom,
refer to the boom’s technical documentation.
Summary of Contents for PULVASOL 200
