26
82.321-M - Pulvasol 1 and 2 / Pulvigne
LUBRICATION AND GREASE
Check the pump oil level.
BP 60/20 PUMP
(figure 11).
Through the level plug (1). If there is not enough oil, remove the stirrups (2), the bell assembly (3) and the plug (4).
The oil must be flush with the bottom edge of the sump hole.
THE OIL CAPACITY FOR A 60 / 20 BP PUMP is 0.40 litre.
BP 105 / 20 PUMP
(figure 12).
Through the level plug (1). If there is not enough oil, remove the rubber plug (2).
THE OIL CAPACITY FOR A 105 / 20 BP PUMP is 0.50 litre.
IMPORTANT NOTE
The holes in the cylinders must be absolutely positioned according to the marks (R).
Oil change
Remove the oil level cover (2) and turn the pump upside down.
INFLATION OF THE AIR CHAMBER
Check the air bell inflation pressure (item 3):
2 bars for use between 2 and 5 bars,
2 to 5 bars for use between 5 and 10 bars,
5 to 7 bars for use between 10 and 20 bars.
Change the oil every campaign.
Grease all the points equipped with a grease nipple
(universal joint, hubs, bearings, etc.).
ELF EPEXA 2 or grease MOBILUX EP2
SAE 30 oil
(BERTHOUD reference 769.286 - 2 L can)
BP 60 / 20
1
2
R
R
R
BP 105 / 20
3
11
12
2
3
4
1
Summary of Contents for PULVASOL 200
