background image

14

15

Important advice

DO NOT attempt to dismantle, modify or add any part to the 

• 

seat. Warranty will expire if non-original parts or accessories 

are used.

DO NOT use anything, such as a cushion, to raise the child seat 

• 

off the passenger seat of the vehicle. In an accident the seat 

will not be able to protect your child in the right way.

Never leave your child unattended in the seat.

• 

Make sure all passengers are informed about how to release 

• 

your child in case of emergency.    

An unoccupied child seat should always be fastened in the 

• 

vehicle.

Make sure luggage or other objects are properly secured. 

• 

Unsecured luggage may cause severe injuries to children and 

adults in case of accidents.   

Never use the seat without the cover. The cover is a safety 

• 

feature and may only be replaced by an original BeSafe cover. 

Under the cover we use EPS foam. Do not push or pull too hard 

• 

against the foam, since you might damage the foam.

Do not use any aggressive cleaning products; these may harm 

• 

the construction material of the seat.

BeSafe advises that child seats should not be bought or sold 

• 

second-hand. 

KEEP this user manual for later use with the seat. 

• 

DO NOT use the seat for longer than 5 years. Due to ageing, 

• 

the quality of the material may change. 

DO NOT use at home on a table or worktop, as long as your 

• 

child is seated in the seat.

When installed with ISOfix: Check the manufacturer’s vehicle 

• 

handbook.

!

Point of sale information

Notice for ISOfix installation 

Next car seat

This is a semi-universal ISOfix Child Restraint System. It is 

• 

approved to regulation No. 44.04, series of amendments for 

general use in vehicles fitted with ISOfix anchorage systems.

It will fit cars with positions approved as ISOfix positions (as 

• 

detailed in the vehicle handbook), depending on category of 

the child seat and of the fixture.

The mass group and the ISOfix size class for which this 

• 

device is intended is: E.

The seat is suitable for fixing into the seat positions of the 

• 

vehicles listed in the separate ‘car list’. Seat positions in 

other vehicles may also be suitable to accept this child 

restraint. If in doubt, consult either the child restraint 

manufacturer or the retailer. For updated car list see: www.

besafe.eu.

BeSafe offers several car seats suitable as from 9 kg. For 

• 

updated car seat program see www.besafe.eu

Practical advice

When the child seat is mounted in the car check all the areas 

where the child seat might touch the interior. We recommend 

using a (BeSafe) protection cover in these places to avoid cuts, 

marks or discolouration on the interior of the vehicle, especially 

in vehicles with leather or wooden interior.

Summary of Contents for iZi Sleep ISOfix










Reviews: