-
BESANTEK
-
•
0
c J
°
F
:
Temperature units of measure
•
CFM/CMM
:
airflow units of measure
• Ft2,
m
2
: units for area dimensions
•
mis, ft/min, km/h, MPH, knots:
air velocity units of measure
•
X10, X100:
multipliers for air flow readings
•
AVG:
air averaging mode
•
RECORD:
indicates that min/max function is running (top for
temp
,
bottom for air)
• Large LCD digits at center of display for Relative Humidity and
IR Temperature
• Smaller LCD digits at top, right of display for Probe
Temperature
• CJ
Low battery indicator
Operation
Connecting the
Vane
1. The vane plug is inserted in the meter's sensor jack at the top
of the meter. The plug and jack are keyed so that the plug can
on
l
y fit in the jack one way
2
.
Tum the plug carefully until it lines up with the jack and then
firmly push the plug in place Do not apply undue force or try
to twist the plug side-to
-
side.
3. If the vane is not connected to the meter or if the sensor is
defective, the LCD display will indicate dashed lines in place
of an air velocity reading.