Temperture & Humidity Data logger
1 _____
2 ____ _
c::r:;;;;
.,s
N
,
1604
�
c::Eia
,.,
v
.,._,
v1.0
-=::>
AlarmSat.4)
3
Record ir.r,ai
5
Figure 2-3 Data Logger Software interface
1. The serial number of the instrument: corresponding to the series number of label
on the back of the instrument.
2. The program version of the instrument.
3. Set upper and lower limit temperature alarm: the measuring temperature of the
instrument is not in the range of the upper and lower limits of this setting will be
alarming.
4. Set upper and lower limit temperature alarm: the measuring temperature of the
instrument is not in the range of the upper and lower limits of this setting will be
alarming.
5. Display unit: select [ C] option temperature display unit
0
c;
select [F] option
temperature display unit
r.
6. Set record interval: every record interval, the instrument records a piece of data in
seconds, the set range is 5~43200S.
7. Check the "Update" option, the instrument synchronizes the computer time.
2.lnstrument boot, enter calibration mode: After synchronizing time, the instrument is
pulled out from the computer, press the OK button to power on, Two LED lights at the same
time, the instrument enters the calibration mode, normal display real-time temperature, can
4
BESANTEK Corporation, CANADA
