check the maxima
l
value, minimum value , alarm lower limit and alarm upper limit, display
temperature and humidity units on the top right of the screen, does not generate PFD
documents. As shown in Figure 2-4:
%°[
,,,,
� �
-
�IL.LI
a
■■■:
LOG
a
■■■:
Figure 2-4 Calibration mode LCD display
Figure 2-5 Record mode LCD display
3.lnstrument is power on again, record data:
Press OK to turn off the instrument after
entering the calibration mode. The
i
nstrument will turn on again and enter the record state.
At this moment, the instrument starts to record the data and normally display temperature
to generate the PDF document
4.View data and save data:
let instrument USS interface directly connect to the computer,
waiting for the generation of PDF documents (according to the quantity of data recorded,
will take a different time), after generate the PDF document, "computer" will appeared a
removable storage device. After opening this disk, a PDF file will appear. Click this file to
read the data recorded by this instrument, and can copy and paste the PDF document to
other computer disk.
Note 1: It is suggested to rename the
document according to actual
needs after copying the
document.
Note 2: the recording capacity of this instrument is 12000 sets
of
data. After
the data storage reaches the upper limit, the LCD temperature column will show
"FUL" and the instrument has finished recording.
5.End use:
This product is a one-time use, so the instrument power off or connect to the
computer in the recording state and the instrument can
'
t power on or can't be re-record
after synchronized instrument setting, but can be connected to the computer to view and
save the data.
2.3PDF document description
1.PDF
generation: After the instrument is connected to a computer, the PDF document
will be generated. At this time, the temperature light will flash and the representative is
5
BESANTEK Corporation, CANADA