Additional Service and Maintenance for IDH Max Locks
W Series Service Manual
6–7
5. Connect the reader wire harness to the control electronics circuit
board. For mortise instructions, see
. For cylindrical instructions, see
Tighten the RQE rose liner on the door with the through-bolts.
6. Make the connections and reinstall the inside escutcheon. For
mortise instructions, see
Task F. To secure the escutcheons and
. For cylindrical
instructions, see
Task G. To secure the escutcheons and complete
7. Reinstall the inside lever/knob. For mortise instructions,
see
Task G. To reinstall the inside and outside levers/knobs:
. For cylindrical instructions, see
inside and outside levers/knobs:
8. Reinstall the core and throw member. For mortise instructions, see
Task H. To reinstall the core (EEL and EEU only):
.
For cylindrical instructions, see
Task I. To reinstall the core and
9.
Making sure that the access door does not pinch any wires
, insert
the tabs of the access door into its mating slots and swing the door
closed. Use the appropriate bit driver to secure the access door with
the security screw. Tighten firmly.
Summary of Contents for 34HW
