BEST ACCESS SYSTEMS
Indianapolis, Indiana
32
Install knobs or levers
For both levers and knobs
Unscrew the inside spindle one full turn to allow the spindles to turn
freely.
For levers
1 With the handle pointing toward the door hinges, put the outside
lever and spindles into the lock from the outside of the door.
2 Slide the inside lever onto the tapered inside spindle.
3 Turn the set screw until it makes contact with the spindle. Then
tighten the set screw approximately 3/4 of a turn.
4 Turn the levers to check that they work smoothly.
For knobs
1 From the outside of the door, put the outside knob and spindles into
the lock.
2 Slide the inside knob onto the tapered inside spindle.
3 Turn the set screw until it makes contact with the spindle. Then
tighten the set screw approximately 3/4 of a turn.
4 Push the set screw cap into the set screw hole.
5 Turn the knobs to check that they work smoothly.
33
Install core
1 For 5C cores, slide the cylinder face down over the 5C core. For all
other cores, go to step 2.
2 Put the control key into the core (or cylinder face) and turn the key
15 degrees clockwise.
3 Adjust the throw pins if needed, then put the core (and cylinder face)
into the cylinder with the control key.
4 Turn the key 15 degrees counterclockwise and remove the key.
Figure 34—Installing the levers
Figure 35—Installing the knobs
Set screw
Spindles
Set screw
Set screw cap
Spindles
Figure 36—Installing the core
1E7J4 cylinder
Cylinder face
5C core
Turn control key 15 degrees.
1C core
Control key
4
Summary of Contents for 34HW
