Installation Instructions for 45HM IDH Max® 1300 Mortise Locks
BEST ACCESS SYSTEMS
a Division of Stanley Security Solutions, Inc.
9
Installation Instructions for 45HM IDH Max® 1300 Mortise Locks
Installing the trim
14
Install trim hole inserts and bushings
1 Insert the two trim hole inserts into the upper trim
hole on each side of the door, as shown in Figure 14.
2 Insert two bushings into the field harness & reader
wire hole on each side of the door, as shown in
Figure 14.
3 Insert a bushing into the sensor & solenoid wire hole
on the inside of the door, as shown in Figure 14.
Figure 14 Installing the trim hole inserts and bushings
Outside of door
Trim hole
insert
Bushing
Trim hole
insert
Bushings
Inside of door