Sheathing Layout for 16' Building
Sheathing
1x4 Trim
Corner Trim
Detail C
Rafter
!
!
!
Cut roof sheathing to fit.
flush
Install the first 4x8 roof sheathing panel against the back of the siding. Note: Install the top edge
of the bottom roof sheathing flush with the face of the 1x4 fascia. See Detail 'C'.
48"x96"
48"x96"
16"x96"
16"x48"
16"x48"
Cut roof sheathing per the appropriate layout below for your shed size. Install roof sheathing
with 7d sinkers, space nails 12" apart. When installing sheathing across the top, insert a
plyclip into the roof sheathing between each truss. There will be a 1" space from top of
roof sheathing and roof peak.
Plyclip
1. Install 71-3/4" long 1x3 door trim on each side of
door frame. Temporarily tack trim flush with door
opening and bottom of siding so they can be
adjusted, if necessary, when installing the doors.
2. Install 71-1/2" long 1x3 on top of door side trim.
3. Install 75-7/8" long 1x4 corner trim on corners of
the sidewalls.
1x4 Corner Trim
Sheathing Layout for 10' or 12' Building
48"x96"
16"x96"
Step 14
Install Roof Sheathing
Step 13
Install Corner & Door Trim
