4.
Install corner trim and upper wall trim
to the opposite side wall.
6.
Install (4) four 1x4-75 3/4" corner trim boards to the front and back walls
flush with 1x3 trim.
Tip; Paint the siding and trim boards before installing the trim.
5.
Repeat to install filler and
filler on the opposite wall.
Soffit and Filler Flush
with Side Wall Trim
Step 13 Install 12' Side Wall Trim
1.
Install (2) two 75 3/4" long 1x3 corner trim boards to the side wall. Install trim flush with top
plate and flush with the siding on the front and back walls. Use 8d galv. nails, spaced 12" apart.
2.
Butt a 1x4-6' board against corner trim and flush with top plate. Cut a second 1x4-6' board to
finish at opposite corner.
1x3x75-3/4" Trim Board
Double Door
Side Wall
3.
Install (2) two 1x3-72" boards along
each side of the door opening. Tack
these boards with a couple nails; you
may want to move the trim later when
you install the doors.
Siding Extends Below Trim
Trim Flush With Top Plate
Step 14 Install Primed Soffit, Filler and Trim
Front
Wall
Side Wall
Soffit Flush with
Inside of 2x4
3.
Repeat to install 7" soffit
boards on the back wall.
4.
Install (3) three 4-1/4" wide
x 48-3/4" filler panels over
the side walls. Install the
filler flush with the 1x4 trim.
Cut last filler to fit.
7" Soffit
1.
Locate (1) one 7" wide x 48-3/4" long siding panel and cut in half. Install one half over the
front wall with the primed side facing down. Cut edges should be flush with the inside of the
top 2x4 wall plate and flush with the trim on the side wall. Tack the soffit with a couple 6d
common nails. Installing 2x4 tie plates in a later step will provide more nailing.
2.
Install (5) four more 7"x48-3/4" soffit panels cutting the last panel flush with the side wall trim.
4-1/4" Filler
