X
X
X
X
X
X
Step 10 Assemble End Walls
1.
Position (2) two 2x4-10' boards
together and indicate with 'X' marks,
where the wall studs will be located.
10' - 0" Wall Plate
24"
24"
23-1/4"
4.
Square wall frame. Cut (5) five 4x8 siding panels to a length of 77-1/4". Install the first
panel flush with the left end of the wall flush and flush with the top of the 2x4 tie plate.
5.
Cut the last panel flush with the end of the wall frame.
Siding Extends Below Plate
6.
Repeat to assemble the other end wall. Start with the half siding panel cutoff.
LAP
2.
Install 72" wall studs between the top and bottom plates.
3.
Install (2) two 56-1/2" long 2x4 as tie plates over the top plate. The 2x4s will be 3-1/2"
short of the end of the wall frame.
Top Plate
Wall Stud
3-1/2"
56-1/2" Tie Plate
56-1/2" Tie Plate
141-1/2"
141-1/2"
X
X