Best Fitness BFE2, Owner'S Manual

 31

cOnsOle OperatiOn

Use the UP/DOWN   buttons to set age.
Once the age has been set, press the MODE  button to confirm the selection.

The display will calculate the preset Heart Rate value automatically according to the 

age setting entered. The display will show Heart Rate percentages of 55%, 75%, 90% 

and TARGET.  Target allows the user to input a custom heart rate goal. Select one of 

the options by pressing the UP/DOWN   buttons. 

Once the Heart Rate percentage or the TARGET feature has been set, press the MODE  

button to confirm the selection. If TARGET has been selected, set the target heart rate 

by using the UP/DOWN buttons then confirm the selection by pressing the MODE  

button. Function values may be preset for TIME, DISTANCE, and CALORIES by using 

the UP/DOWN buttons. After choosing the desired function value, press the MODE  

button to confirm the setting.

Press the START/STOP button to start training. During exercise, the user selected 

preset values will count down. If no preset values were selected, the display values 

will count up. 

For more information, see the section ‘Monitoring Your Heart Rate’.

9

20

STEP 7 – Handlebar Assembly

Slide Left and Right Handlebar
Assembly over the top of the Swing
Arm Assembly and insert 3 Allen 
Bolts per side.

Hand tighten first 

to begin all Allen Bolts.

Then,

tighten Allen Bolts with the 5mm 
Allen Wrench provided.

7

right 

handlebar

assembly

REAR

FRONT

right swing arm

assembly

left swing arm

assembly

upright

frame

assembly

left 

handlebar

assembly

6 - M8 x 20mm 

allen bolts

STEP 6 – Swing Arm Covers

Attach the Swing Arm Covers 
on the front of the Swing Arms 
with Phillips Bolts. Tighten with 
the Phillips Screwdriver provided.

6

swing arm

covers

2 - M6 x 12mm 

phillips bolts

NOTE:

If you find it difficult to get

the Bolt started, first thread the
Bolt into the hole on the Swing
Arm without the Cover. Then,
remove the Bolt and repeat 
Step 6 above.

HEART RATE

Training in H.R.C. Mode:

AGE 30 will be blinking after you enter H.R.C. Mode.
You may set your age by pressing the UP or DOWN
and MODE button to set. The Monitor will calculate
preset Heart Rate value automatically according
to your age setting. (Preset at Age 30). Screen will
show Heart Rate percentage 55%, 75%, 90% and
TARGET. You may select Heart Rate percentage 
by pressing the UP or DOWN button and MODE 
button for training.

Note: 

1.

If there is no signal for over 4 minutes, the screen
will turn off and display room temperature, clock,
and calendar.

2.

When Monitor displays abnormally, please 
unplug the adapter and plug-in again.

NB 8000 Program Profiles

9

20

STEP 7 – Handlebar Assembly

Slide Left and Right Handlebar
Assembly over the top of the Swing
Arm Assembly and insert 3 Allen 
Bolts per side.

Hand tighten first 

to begin all Allen Bolts.

Then,

tighten Allen Bolts with the 5mm 
Allen Wrench provided.

7

right 

handlebar

assembly

REAR

FRONT

right swing arm

assembly

left swing arm

assembly

upright

frame

assembly

left 

handlebar

assembly

6 - M8 x 20mm 

allen bolts

STEP 6 – Swing Arm Covers

Attach the Swing Arm Covers 
on the front of the Swing Arms 
with Phillips Bolts. Tighten with 
the Phillips Screwdriver provided.

6

swing arm

covers

2 - M6 x 12mm 

phillips bolts

NOTE:

If you find it difficult to get

the Bolt started, first thread the
Bolt into the hole on the Swing
Arm without the Cover. Then,
remove the Bolt and repeat 
Step 6 above.

HEART RATE

Training in H.R.C. Mode:

AGE 30 will be blinking after you enter H.R.C. Mode.
You may set your age by pressing the UP or DOWN
and MODE button to set. The Monitor will calculate
preset Heart Rate value automatically according
to your age setting. (Preset at Age 30). Screen will
show Heart Rate percentage 55%, 75%, 90% and
TARGET. You may select Heart Rate percentage 
by pressing the UP or DOWN button and MODE 
button for training.

Note: 

1.

If there is no signal for over 4 minutes, the screen
will turn off and display room temperature, clock,
and calendar.

2.

When Monitor displays abnormally, please 
unplug the adapter and plug-in again.

NB 8000 Program Profiles

9

20

STEP 7 – Handlebar Assembly

Slide Left and Right Handlebar
Assembly over the top of the Swing
Arm Assembly and insert 3 Allen 
Bolts per side.

Hand tighten first 

to begin all Allen Bolts.

Then,

tighten Allen Bolts with the 5mm 
Allen Wrench provided.

7

right 

handlebar

assembly

REAR

FRONT

right swing arm

assembly

left swing arm

assembly

upright

frame

assembly

left 

handlebar

assembly

6 - M8 x 20mm 

allen bolts

STEP 6 – Swing Arm Covers

Attach the Swing Arm Covers 
on the front of the Swing Arms 
with Phillips Bolts. Tighten with 
the Phillips Screwdriver provided.

6

swing arm

covers

2 - M6 x 12mm 

phillips bolts

NOTE:

If you find it difficult to get

the Bolt started, first thread the
Bolt into the hole on the Swing
Arm without the Cover. Then,
remove the Bolt and repeat 
Step 6 above.

HEART RATE

Training in H.R.C. Mode:

AGE 30 will be blinking after you enter H.R.C. Mode.
You may set your age by pressing the UP or DOWN
and MODE button to set. The Monitor will calculate
preset Heart Rate value automatically according
to your age setting. (Preset at Age 30). Screen will
show Heart Rate percentage 55%, 75%, 90% and
TARGET. You may select Heart Rate percentage 
by pressing the UP or DOWN button and MODE 
button for training.

Note: 

1.

If there is no signal for over 4 minutes, the screen
will turn off and display room temperature, clock,
and calendar.

2.

When Monitor displays abnormally, please 
unplug the adapter and plug-in again.

NB 8000 Program Profiles

9

20

STEP 7 – Handlebar Assembly

Slide Left and Right Handlebar
Assembly over the top of the Swing
Arm Assembly and insert 3 Allen 
Bolts per side.

Hand tighten first 

to begin all Allen Bolts.

Then,

tighten Allen Bolts with the 5mm 
Allen Wrench provided.

7

right 

handlebar

assembly

REAR

FRONT

right swing arm

assembly

left swing arm

assembly

upright

frame

assembly

left 

handlebar

assembly

6 - M8 x 20mm 

allen bolts

STEP 6 – Swing Arm Covers

Attach the Swing Arm Covers 
on the front of the Swing Arms 
with Phillips Bolts. Tighten with 
the Phillips Screwdriver provided.

6

swing arm

covers

2 - M6 x 12mm 

phillips bolts

NOTE:

If you find it difficult to get

the Bolt started, first thread the
Bolt into the hole on the Swing
Arm without the Cover. Then,
remove the Bolt and repeat 
Step 6 above.

HEART RATE

Training in H.R.C. Mode:

AGE 30 will be blinking after you enter H.R.C. Mode.
You may set your age by pressing the UP or DOWN
and MODE button to set. The Monitor will calculate
preset Heart Rate value automatically according
to your age setting. (Preset at Age 30). Screen will
show Heart Rate percentage 55%, 75%, 90% and
TARGET. You may select Heart Rate percentage 
by pressing the UP or DOWN button and MODE 
button for training.

Note: 

1.

If there is no signal for over 4 minutes, the screen
will turn off and display room temperature, clock,
and calendar.

2.

When Monitor displays abnormally, please 
unplug the adapter and plug-in again.

NB 8000 Program Profiles

Target Heart Rate at 55% For A 30 Year Old User

Target Heart Rate at 75% For A 30 Year Old User

Target Heart Rate at 100% For A 30 Year Old User

Target Heart Rate at 90% For A 30 Year Old User