background image

 12

seTTing up YOur TreadMill

PLACEMENT IN YOUR HOME

To make exercise a desirable daily activity for you, the treadmill should be placed in a comfort-

able and attractive setting. This treadmill is designed to use minimal floor space and to fit nicely 

in your home.

 

Do not place or operate the treadmill outdoors.

 

Do not place the treadmill near water or in high moisture content environment.

 

Make sure the power cord is not in the path of heavy traffic.

 

It is highly recommended to place a dedicated treadmill mat beneath your treadmill.

 

A dedicated mat provides superior stability and firmness for a proper workout.

 

Locate the treadmill at least 4 feet from walls or furniture.

 

Allow a safety area of 79” x 39” (2000mm x 1000mm) behind the treadmill 

 

so that you can easily get on and off the treadmill and adjust the tension of the belt.

Occasionally, after extended use, you will find a fine black dust below your treadmill. This is 

normal wear and DOES NOT mean there is anything wrong with your treadmill. This dust can 

be easily removed with a vacuum cleaner.  If you wish to prevent this dust from getting on your 

floor or carpet, place a dedicated treadmill mat beneath your treadmill.

LEVELING THE BASE

It is important that you place the treadmill on a firm level surface. If the ground is uneven, you 

may level the treadmill with levelers located under the deck. Make sure the back of the deck is 

not higher than the front. If adjustments are to be made, check to see if the leverage feet, as 

shown below, touch the ground firmly. If there is a gap, turn the leverage foot counterclockwise 

to eliminate the gap.

Make sure the running deck is level to the ground. If the deck is positioned so that you are run-

ning downhill, it will cause premature damage to the electronic system

Summary of Contents for BFT1



































Reviews: