26
TrOuBleshOOTing
WHEN TO CALL FOR HELP
This treadmill is designed with user safety as the number one priority. In the event of an electri-
cal failure, the treadmill will shut off automatically to prevent user injury and to prevent damage to
expensive components such as the motor.
When you encounter unusual behavior from the treadmill, simply turn the power switch off and on
to reset the treadmill. This should clear incidental errors and ready the treadmill for normal opera-
tion again.
If after you have reset the treadmill by turning the power switch off and on again, and the treadmill
is still not operational, then it is time to call your dealer for service at (800) 556-3113.
NO SIGNAL ON THE CONSOLE LCD WINDOWS
If there is no signal on the console, even if you turn power off and on many times to reset the tread-
mill, check the communication cable between console and motor controller.
First, make sure the connections are good and that the cable is not pinched or damaged. If defec-
tive, ask your dealer for a replacement cable.
BLOWN FUSES
Blown fuses are not a common event to occur with your treadmill. Fuses may blow if you are doing
or having someone do some technical diagnostics on your treadmill or if there is a serious prob-
lem. And even then, it is generally not recommended for users to replace blown fuses in the motor
controller. When replacing blown fuses, you must use the recommended fuse. When it comes to
treadmill fuses, however, you have to understand that they are not interchangeable with automotive
fuses. And so, if you discover a blown fuse in your treadmill, do not even attempt to make replace-
ments on your own. Instead, contact a dealer for proper advice and replacement.
To reduce the risk of electrical shock, always unplug the treadmill from the electrical outlet
before servicing.
