background image

  3

iMpOrTanT saFeTY insTrucTiOns 

Before beginning any fitness program, you should obtain a complete physical examination from your physician.

Il est conseille de subir un examen medical complet avant d’entreprendre tout programme d’exercise. Si vous 

avez des etourdissements ou des faiblesses, arretez les exercices immediatement.  

 

Antes de comenzar cualquier programma de ejercicios, deberias tener un examen fisico con su doctor. 

 

 

When using exercise equipment, you 

should always take basic precautions, 

including the following:

• Read all instructions before using the BFT1. These

  instructions are written to ensure your safety and to

  protect the unit.

• Do not allow children on or near the equipment.

• Use the equipment only for its intended purpose as

  described in this guide. Do not use accessory

  attachments that are not recommended by the

  manufacturer. Such attachments might cause injuries.

• Wear proper exercise clothing and shoes for your

  workout, no loose clothing.

• Use care when getting on or off the unit.

• Do not overexert yourself or work to exhaustion.

• If you feel any pain or abnormal symptoms, stop your

  workout immediately and consult your physician.

• Never operate unit when it has been dropped or

  damaged. Return the equipment to a service center

  for examination and repair.

• Never drop or insert objects into any opening in the

  equipment.

• Always check the unit before each use. Make sure

  that all fasteners are secure and in good working

  condition.
• Do not use the equipment outdoors or near water.

Personal Safety During assembly

• It is strongly recommended that a qualified dealer

  assemble the equipment. Assistance is required.

• Before beginning assembly, please take the time to

  read the instructions thoroughly.

• Read each step in the assembly instructions and

  follow the steps in sequence. Do not skip ahead. If

  you skip ahead, you may learn later that you have to

  disassemble components and that you may have

  damaged the equipment.

• Assemble and operate the BFT1 on a solid, level

  surface. Locate the unit a few feet from the walls or

  furniture to provide easy access.

The BFT1 is designed for your enjoyment. By

following these precautions and using common

sense, you will have many safe and pleasurable hours

of healthful exercise with your Best Fitness BFT1.

After assembly, you should check all functions to

ensure correct operation. If you experience problems,

first recheck the assembly instructions to locate any

possible errors made during assembly. If you are unable

to correct the problem, call the dealer from whom

you purchased the machine or call 1-800-556-3113

for the dealer nearest you.

obtaining Service

Please use this Owner’s Manual to make sure that all

parts have been included in your shipment. When

ordering parts, you must use the part number and

description from this Owner’s Manual. Use only

Best Fitness replacement parts when servicing this

machine. Failure to do so will void your warranty and

could result in personal injury.

For information about product operation or service,

go to www.bestfitness.com or contact an authorized 

Best Fitness dealer or a Best Fitness factory-authorized 

service company or contact Best Fitness customer 

service at one of the following:

Toll Free:   1-800-556-3113

Phone:      1-708-427-3555

Fax: 

    1-708-427-3556

Hours:      M-F 8:30-5:00 CST

E-Mail:      service@bodysolid.com

Or write to: Best Fitness

 

    Service Department

 

    1900 S. Des Plaines Ave.

 

    Forest Park, IL 60130 USA

Retain this owner’s Manual for future

reference. Part numbers are required when

ordering parts.

Summary of Contents for BFT1



































Reviews: