7
Assembly of the BFT1 takes professional installers about 1/2 hour to complete. If this is the
first time you have assembled this type of equipment, plan on significantly more time.
P
rofessional
installers
are
highly
recommended
!
However, if you acquire the appropriate tools, obtain assistance, and follow the assembly
steps sequentially, the process will take time, but is fairly easy.
assembly tips
Read all “Notes” on each page before beginning
each step.
While you may be able to assemble the BFT1
using the illustrations only, important safety
notes and other tips are included in the text.
Some pieces may have extra holes that you will
not use. Use only those holes indicated in the
instructions and illustrations.
NOTE: To find out the length of a particular bolt,
measure its shank (the long, narrow part
beneath the head).
Refer to the following diagram:
Do not fully tighten bolts until instruct-
ed to do so.
Note: After assembly, you should check all func-
tions to ensure correct operation. If you expe-
rience problems, first recheck the assembly
instructions to locate any possible errors made
during assembly.
If you are unable to correct the problem, call the
dealer from whom you purchased the machine
or call 1-800-556-3113 for the dealer nearest
you.
asseMBlY insTrucTiOns
