9
ENGLISH
Replacement Instructions - 400VA Models
1
Phone Best Power’s Worldwide Service to order a replacement battery pack. It must be the
same type and rating as the original battery. See Battery information in Specifications.
2
If it is necessary, the battery may be replaced while the Patriot Pro II is running with the
protected equipment attached. Option: You may switch off and unplug the protected load
equipment from the Patriot Pro II. Then, turn off the Patriot Pro II and disconnect the line
cord.
3
On the bottom of the Patriot Pro II, remove the Phillips screw at the end of the battery door
and slide the door off.
4
Use the flap attached to the battery to lift it out of the unit.
5
Disconnect the battery cables form the old
battery. Dispose of the old battery properly.
6
Connect the battery cables to the new battery: red
to positive (+), black to negative (-). Carefully
install the battery back into the Patriot Pro II.
7
Slide the battery door back into place and secure
with the Phillips screw removed in step 3.
8
If you followed the option in Step 2:
Reconnect the line cord to the Patriot Pro II unit
and turn the unit on. Reconnect the load
equipment. Switch on the protected load
equipment one piece at a time.
Red
Black