background image

2

Part

 Drawing

Description

Qty

Missing Parts or UPS Damaged Parts

For Your Convenience you can

EMAIL us at

support@moorecoinc.com

24HOURS 7 DAYS A WEEK

Should you require assistance during  assembly,

please call our

Customer  Service Department

Monday - Friday  8 a.m. - 5 p.m.

 Central Standard Time

Toll-Free Customer Service

1-800-749-2258

Do not use unless all screws  are tight. At least every six months, check all screws to be sure

they are tight. If parts are missing, broken, damaged, or worn, stop use of the product until

repairs are made by your dealer using factory authorized parts.

Important Information

 Hardware List

Use Screw Anchor (C) in place of Screw
Anchor (B) for Drywall Applications.

A                            Long Screw (1-1/4” )

B                            Screw Anchor - Concrete

C                            Screw Anchor - Drywall

D                            Top Bracket Screw          2 EA

E                           Bottom Bracket Screw     2 EA

F                           Bottom Bracket Washer   2 EA

P-1                                      Track                   1 EA

E

Whiteboard Track System

P-2                                        Top Bracket           2 EA

P-3                                        Bottom Bracket      2 EA

P-4                                          Bottom Wheel      2 EA

Summary of Contents for MOORECO 62853








Reviews: