4
Do not use unless all screws are tight. At least every six months, check all screws
to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use
of the product until repairs are made by your dealer using factory authorized parts.
Illustration # 3
Illustration # 4
Detach 2 Screws from each side
of Framed Board’s brackets (P-5)
with Allen Wrench (H) as shown
in illustration # 3.
4.
Install Flange (C) on each side of the
board using the same Screws from Step
4 and tighten with Allen Wrench (H).
See illustration # 4.
5.
K
Screws
C
Screws
Snap Connector (K) on each side of
Framed Board (P-5), line up holes and
attach using one Screw (B) and one
Tapped Rivet (L).
4A.
L
B
P-5
