BEST SCRUBBER 20 / 28 DISK
29
Questions? Call 801-855-7757 Use OEM Parts
OTHER
Status Light Guide
Below is a list of self-help actions. Try to use this list before you contact your service agent. Go to the number in the list
which matches the number of indicator light flashes and follow the instructions.
The battery needs charging, there is a bad connection to the battery or dependent on
programming, may indicate that the battery lockout function is active and the controller is
in a restricted mode of operation. Check the connections to the battery. If the connections
are good, try charging the battery.
There is a bad connection to the motor. Check all connections between the motor and
the controller.
The motor has a short circuit to a battery connection. Contact your service agent.
The battery charge level has fallen below the Battery Lockout Level and the controller is
inhibiting certain machine functions. Charge the battery.
Not Used.
The controller is being inhibited from driving, this may be because the battery charger is
connected.
A throttle fault is indicated. Make sure that the throttle is in the rest position before
switching on the machine.
A controller fault is indicated. Make sure that all connections are secure.
The parking brakes have a bad connection. Check the parking brake and motor
connections. Make sure the controller connections are secure.
An excessive voltage has been applied to the controller. This is usually caused by a poor
battery connection. Check the battery connections.
1 Flash
2 Flash
3 Flash
4 Flash
5 Flash
6 Flash
7 Flash
8 Flash
9 Flash
10 Flash
