1
Please read these instructions
before beginning.
For any questions
call us at 800.914.2003
Tools Needed:
•
Phillips Head
Screwdriver
(Drill/Impact is easiest)
•
7/16 Socket
1.
Start by removing the screws marked
with red paint from the lid marked
with red “1”. Remove the top lid from
the crate.
2.
On side 4 (FIG 1) of the crate, cut the
two black retaining straps.
3.
On the opposite end of the crate, the
required wall is marked with a red
“4” and stripes, remove the screws
securing the end wall to the crate.
Remove the end wall. (FIG 2)
4.
In the crate, cut the band securing
the control arm.
5.
Grab the tug’s handle and pivot the
tug up with the tug’s weight resting
on the tires.
6.
Push the master switch to the “on”
position.
7.
Left thumb pressure moves the tug
backward.
Slowly
increase pressure
on the throttle with your left thumb
and back your tug out of the crate.
FIG 2
3
3
1
1
2
2
4
4
FIG 1
UNCRATING INSTRUCTIONS
