Service and Maintenance
3–8
7KC Series Service Manual
5. From the outside of the door, install the chassis assembly. The
outside rose and liner assembly should be flush with the door. Make
sure the latch tabs engage the chassis frame and the latch tailpiece
engages the retractor. See
.
6. Reinstall the following components:
■
)
■
).
Replacing the
button
assembly
To remove the button assembly:
Note:
These instructions apply for all types of button assemblies.
Figure 3.8
Engaging the retractor in the latch
Chassis frame
Latch tab
Latch tailpiece
Retractor
Chassis frame
