Service and Maintenance
7KC Series Service Manual
3–5
Replacing the
inside rose
To remove the inside rose:
).
2. Insert a flat blade screwdriver in the slot between the rose and liner, as
. Pry the rose until it pops off the liner.
3. Unscrew the two through-bolts. Save the through-bolts.
4. Slide the liner off the sleeve. Save the liner.
To reinstall the inside rose:
1. Align the holes in the liner with the holes prepared in the door, as
shown in
.
2. Install the two through-bolts through the liner and door in the top and
bottom holes.
3. Tighten the liner onto the door with the through-bolts.
4. Align the slot in the rose with the tab on the liner and firmly press
until the rose is flush with the door.
Figure 3.4
Removing the inside rose with the screwdriver
Inside of door
Location of the slot in the rose
Summary of Contents for 7KC Series
