background image

Do not place the device directly under an air-conditioner so as to prevent 

condensation water from dripping on the device.

Ensure that all the filters are correctly installed before you turn on the device.

Use only the original filters provided by the manufacturer for this device. Do not use 

any other filters.

Ensure that hard objects do not hit against the device (especially against the air 

inlets and outlets).
Always lift or move the device using the handle on the back of the device.

Do not insert your finger or objects in the air outlet.

If you have used insect repellents, do not use the device at places with oily residues 

or in the presence of incense or fumes.

Do not use the device in the vicinity of gas appliances, heating appliances or 
chimneys. Turn off the device after use or before cleaning.
Do not use the device in a room with major temperature fluctuations because they 

can lead to condensation inside the device.

The device is intended solely for use in households under normal operating 

conditions.

Do not use the device in a humid environment or in an environment with high 

ambient temperatures such as bathrooms, WC or in the kitchen.

 

The device does not remove carbon monoxide (CO) or radon (Rn). It cannot be 

used as a safety device with combustion processes and hazardous chemicals in case 

of accidents.

 

The device has a reliable protection. If the front panel has not been installed 

correctly, the device cannot be started. 

 

The manufacturer itself has equipped the device with all the filters, but the filter 

packaging needs to be removed before the device can be used. Remove all the 

filters, unpack them and place them again in the device, as has been described on 

the following pages.

Summary of Contents for airjet 500













Reviews: