background image

Sport Bar Covers – Installation Instructions

Rev. B 1106

80022 / 80023  pg. 7

Limited Warranty

Care and Maintenance of your New Covers

Your covers are made of the finest materials available. To keep it looking new and for the maximum possible wear, it will need periodic cleaning and maintenance.

Zippers:

 Keeping the zipper cleaned and lubricated with a silicone lubricant will help prevent damage and 

keep the zippers in a smooth working condition. If a zipper opens behind the slide, the slider may have been
spread apart.  This problem can usually be repaired by using an ordinary pair of pliers to bring the sides back
into parallel. Return slider to the end of the zipper in the normal Open position. Squeeze lightly at first and test
the zipper.  If the zipper continues to remain open squeeze more firmly with the pliers and try the zipper again.
Repeat this procedure until the zipper operates correctly.    

Snaps:

 Keep snaps cleaned and lubricated with silicone to help prevent snaps from sticking to the studs. If a snap does become 

stuck to a stud, use a screwdriver and GENTLY  pry apart to prevent permanent damage to the snap or the fabric.

Damaged Slider - 

Jaws Spread Apart

(sometimes broken)

Normal Slider -

 Jaws Parallel 

For further information or request for warranty work, please contact:
Bestop Inc.
Customer Service
Toll-Free: (800) 845-3567             E-mail: csbestop@Bestop.com
Main: (303) 465-1755 

      Website:  www.Bestop.com

Washing:

The fabric should be washed often using soap, warm water and a soft bristle brush.  Rinse with clear water to remove all traces of soap or use Bestop

Water:

  Seeping through at the seams may be stopped by applying 3M Scotchgard® on the inside of the seams.  Rips in the fabric

-recommended Bestop Cleaner and Bestop Protectant.  Bestop Cleaner and Bestop Protectant are specially formulated to provide a total cleaning and protection
system.  Bestop Cleaner will not harm vehicle finish, is biodegradable and environmentally friendly.  Bestop Protectant protects against UV- fading, cracking and
hardening.

may be repaired with Bondex® iron on patches.  Iron the patches to the Inside of the covers, carefully following the Bondex® instructions.

We warrant our product to be free from defects in material and workmanship, for the terms specified below, provided there has been normal use and proper mainten-
ance.  This warranty applies to the original purchaser only.  All remedies under this warranty are limited to the repair or replacement of any item or items found by
the factory to be defective within the time period specified.  

If you have a warranty claim, first you must call our factory at the number below for instructions.  You must retain proof of purchase and submit a copy with any items
returned for warranty work.  Upon completion of warranty work, if any, we will return the repaired or replaced item or items to you freight prepaid.  Damage to our
products caused by accidents,  fire, vandalism, negligence, misinstallation, misuse, Acts of God, or by defective parts not manufactured by us, is not covered
under this warranty.   

THE WARRANTY TIME PERIOD IS AS FOLLOWS FOR ALL OTHER “SOFT GOODS” MANUFACTURED BY OUR COMPANY (USING PRIMARILY
VINYLS, PLASTICS, AND/OR FOAM):  ONE YEAR FROM DATE OF PURCHASE.  ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND
/OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE LIMITED IN DURATION TO THE SAME DURATION AND SCOPE AS
THE EXPRESS WRITTEN WARRANTY.  OUR COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE. 

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you.  This warranty gives you specific legal rights, and you may also have  other rights which vary from state to state.

THE WARRANTY TIME PERIOD IS AS FOLLOWS FOR REPLACE-A-TOP

TM

, SAILCLOTH REPLACE-A-TOP

TM

, SUPERTOP

®

, SUPERTOP

®

 REPLACEMENT SKINS, SUNRIDER

®

, AND TIGERTOP

®

:  TWO YEARS FROM DATE OF PURCHASE.

Summary of Contents for Sport Bar Covers








Reviews: