background image

39333/39343  pg 1

1201   Rev.  B

TrailMax™ Fold and Tumble
Rear Seat

Installation Instructions

Before you begin installing this seat, please read all installa-
tion instructions and warnings thoroughly.

This seat is designed to be used on the model vehicles
described above. Use of this seat on any other vehicle or
failure to install this seat properly may result in an improperly
mounted seat and could result in unexpected movement of
the seat and loss of control of the vehicle, thereby placing the
occupants of the vehicle and others in a potentially danger-
ous situation.

This seat system is intended to be used with seat belts at all
times. Do not rely on the seat to maintain the seating position
of occupants, in the event of an accident.

WEAR SEAT BELTS AT ALL TIMES

Read and follow, precisely, all installation instructions pro-
vided when installing this product. Failure to do so may result
in a poor fit and could place occupants of the vehicle in a
potentially dangerous situation.

WARNING

 For:  All Jeep

®

 CJ5s, CJ7s and Wranglers 1955-1995

Part Number: 39333 Vinyl

39343 Cloth

Jeep

®

 is a registered trademark of Chrysler and

Bestop is not affiliated with Chrysler Corporation.

NOTE:  In 1985 and older vehicles, the seat
installation will be easier with two people.

Summary of Contents for TrailMax 9333 Vinyl








Reviews: