instruction manual
20
English
use - grilling
1. Allow the grill plate to preheat (see ‘Preheating’).
2. If so required, grease the grill plate with a little oil.
3. Place the food you wish to grill on the grill plate.
4. Grill the food until it is cooked. Turn the food over occasionally whilst it is being grilled to ensure that both
sides are evenly cooked.
5. Remove the food from the grill plate and place on a plate. Take care! The food is hot.
Do not use a fork, knife or other sharp object! You can damage the non stick coat with it. WARRANTY
WILL BE VOID WHEN DAMAGING THE BAKING PLATE BY SHARP OBJECTS!
use - After use
1. Turn the thermostat dial to the “0” position.
2. Remove the plug from the wall socket.
3. Let the appliance cool down fully.
4. Remove the thermostat by holding the
appliance’s handle with one hand and pulling the
thermostat out of the socket with the other hand.
Make sure you do not touch the appliance’s
metal socket; it may still be hot. Always hold the
thermostat by the plastic section (See Figure 3.)
The metal pin fitted to the thermostat can be very
hot.
cleAning And MAintenAnce
Clean the appliance after each use.
1. Remove the plug from the wall socket, allow the appliance to cool down completely, and pull the
thermostat out of the socket.
2. Clean the grill plate and the base with a damp cloth, if necessary moistened with a couple of drops of
washing-up liquid.
3. Dry the grill plate and the base thoroughly.
• Verify that the appliance is not connected to the power supply before you start to clean it.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
• Never immerse the socket, thermostat, plug or power cord in water or other liquid.
tHe enVironMent
• Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
• When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to the
symbols on the product, the user’s instructions or the packaging.
• The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
• Contact your municipality for the address of the appropriate collection point in your neighbourhood.
guArAntee terMs
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried out
during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty appliance
(in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
1
2
3
4
5
SELF
CONTRO
L
Therm
os
ta
t
Summary of Contents for AHP1500
Page 32: ......