Bestway LAY-Z-SPA 60001, Owner'S Manual

NOTE: 

Remove the chemical dispenser from spa when the spa is in use.

IMPORTANT: 

After performing chemical maintenance and before using the spa, use 

a test kit (not included) to test the water chemistry. We recommend maintaining your 

water as below table.

Important: 

Add chemical liquid in small doses and in 

the center of the pool avoid directly contact of the 

chemical with the spa surface, the direct contact of 

chemical with spa material will damage the material 

and discolored the surface.

NOTE:

 Damage resulting from chemical imbalance is not covered by the warranty. 

Pool chemicals are potentially toxic and should be handled with care. There are 

serious health risks from chemical vapors and the incorrect labeling and storage of 

chemical containers. Please consult your local pool supply retailer for more 

information about chemical maintenance. Pay close attention to the chemical 

manufacturer’s instructions. spa damage resulting from misuse of chemicals and 

mismanagement of spa water is not covered by the warranty.

Important: 

Over usage of chemical will discolored the printing and all points of the 

spa material, in worse case damage the structure of the spa liner.

pH

7.4-7.6

Total Alkalinity

80-120ppm

Free Chlorine

2-4ppm

Using chemical tablets (not included):

Using chemical liquid (not included):

Water Maintenance

Many pollutants in the water settle on surfaces below the water line. These 

pollutants can cause bacterial, algal or fungal growth. It is recommended that spas 

are cleaned as regularly as necessary. After a time, tenacious stains or biofilms may 

develop on the accessible surfaces below the water line or high concentrations of 

salts or unwanted reaction by-products may also occur. Depending on hygienic 

condition, cleanliness, visibility, odour, debris and stains, it is recommended to 

change the water completely and clean/disinfect the spa. When emptying the spa, 

the regulations and the instructions for draining the water shall be observed.

Keeping your spa water clean and chemically balanced is necessary. Simply 

cleaning the filter cartridge is not enough for proper maintenance, we recommend 

you use pool chemicals to maintain water chemistry and chlorine or bromine tablets 

(do not use granules) with the chemical dispenser.

Water quality will be directly related to frequency of use, number of users and 

overall maintenance of the spa.  The water should be changed every 

3 days if there is no chemical treatment being performed with the water.

It is highly recommended to use tap water for spa filling to minimize the influence of 

unwanted content, such as minerals. Barefoot areas and relaxing areas shall be 

cleaned as well. No cleaning water may flow into the spa or spa water cycle. The 

dirt and cleaning agents shall be rinsed carefully to drain in the spa surround.

Note:

 We recommend you take a shower before using your Lay-Z-Spa, as cosmetic 

products, lotions, and other residues on the skin can quickly degrade water 

quality.To use the chemical dispenser, please follow the below instruction.

Important: 

Don't use granulate tablet or throw the tablet directly in the water, the 

chemical will deposit on the bottom and damage the material and discolored the PVC.

C

on

-l

o

i n

5

30