background image

Speaker Testing Method

1. Frequency response

Use Pink noise to test the speaker in the anechoic room, 
adjust the level to make the speaker work at its rated 
impedance and the power output is 1W, then test the
 frequency response 1m  away from the speaker.

2. Sensitivity

Use full range Pink noise which was modified by EQ curve
 to test the speaker in the anechoic room, enlarge the signal 
to make the speaker work at its rated impedance and the 
power output is 1W, then test the sensitivity  1m  away from 
the speaker.

3. MAX.SPL

Use full range Pink noise which was modified by EQ curve 
to test the speaker in the anechoic room, enlarge the signal
 to make the speaker work at its instant power output level, 
then test the SPL  1m  away from the speaker.

4. Rated Power

Use the pink noise according to IEC#268-5 to test the speaker, 
enlarge the signal for continuous 100hours, the rated Power
is the power when the speaker will not incur hot damage or
mechanics damage. 

QS1000 

2 4" High frequency drivers

45Hz-22kHz

90dB

8 Ohms

120

120

550mm 316mm 336mm
(21.5in 12.4in 13.2in)

117dB/123dB(PEAK)

40Hz-24kHz

1 10" Woofer

1.2 kHz

3

M8 Bracket lifting point

Cabinet Exterior with/without 
polyurethane spraying treatment 
(depends on colors)Grill with cloth

9kg(19.8 lb.)

11kg(24.3 lb.)

4

620mm 385mm 425mm
(24.4in 15in 16.7in)

6

S

e

n

si

ti

v

it

y

 (d

B

)

20

10

30

50

70

90

110

316

100

10

3.16

Frequency (Hz)

Im

p

e

d

a

n

ce

 (O

h

m

s)

50

100

200

500

2k

5k

10k

20k

1k

10" Two Way Full Range Pro Speaker System 

TECHNICAL SPECIFICATION

Technical Sheet

Frequency Response And Impedance Curve

Frequency response curve 
Impedance curve 

150W (RMS)
300W (MUSIC)
600W (PEAK )

Two way full range speaker

Tweeter:

Dispersion H V :

1

2

3

System: 

Woofer 

:

Frequency response(-3dB):

Frequency response(-10dB):

Sensitivity

(1W@1m):

Max.SPL(1m):

Power:

Rated impedance:

Cabinet: 

Mounting accessories

:

Painting: 

Cabinet dimension: 

(W D H)

Package dimension: 

(W D H)

N.W.(pc):

G.W.(pc):

Connector:

Crossover point:

Wire clamp

Polypropylene injection moulding

Summary of Contents for QS1000











Reviews: