background image

COMPACT LINE ARRAY SOUND REINFORCEMENT SYSTEM

27

If malfunction occurs during the specified warranty 
period from the date of original purchase, the product 
will be repaired or replaced without charge by Elder 
Audio.

The Limited Warranty does not apply to:
(a) exterior finish or appearance;
(b) certain specific items described in the individual 
      product data sheet or owner's manual;
(c) malfunction resulting from use or operation of the 
      product other than as specified in the individual 
      product data sheet or owner's manual;
(d) malfunction resulting from misuse or abuse of the 
      product;
(e) malfunction occurring at any time after repairs have 
      been made to the product by anyone other than 
      Elder Audio Service or any of its authorized service 
      representatives.

To obtain warranty service, a customer must deliver 
proof of purchase of the product in the form of a bill of 
sale or receipt invoice.

R4 R8 
against malfunction due to defects in materials or 
workmanship for a period of three (3) years from the 
date of original purchase. The Limited Warranty does 
not apply to burned voice coils or malfunctions such 
as cone and/or coil damage resulting from improperly 
designed enclosures. Additional details are included 

/

Speakers and Speaker Systems are guaranteed 

in the Limited Warranty statement.

R4/
due to defects in materials or workmanship for a period 
of one (1) year from the date of original purchase. 
Additional details are included in the Limited Warranty 

R8 Accessories are guaranteed against malfunction 

statement.

R4/R8
hardware and rigging accessories) is guaranteed against 
malfunction due to defects in materials or workmanship 
for a period of one (1) year from the date of original 
purchase. Additional details are included in the Limited 

 Flying Hardware (including enclosure-mounted 

Warranty statement.

LIMITED WARRANTY

Specifications subject to change without notice.

DO NOT OPEN THE COVER

Do not open the cover to avoid the risk of electric shock 
caused by high voltage parts in the product. Any problems 
caused by user's wrong actions are out of warranty. 

AVOID OBJECT AND LIQUID ENTRY

Take  care  that  objects  do  not  fall  into  and  that  liquids 
are not spilled into the inside of the product.If the object 
or liquid enter the product,please ask qualified personnel 
to check it.

ABNORMAL STATUS

In the event of abnormal noise and smell, please put 
off the power supply and pull out the cord, please ask 
qualified personnel to check it.

NONUSE FOR A LONG TIME

When nonuse it for a long time, please put off the power 
supply and pull out the cord to avoid the unexpected 
dangers.

Please hold the plug when pull out or plug 

 

Do  not  pull  out  or  touch  the  cord  with  wet  hand,  or   
it will cause the risk of electric shock. Power supply cords  
should  be  routed  so  they  are  not  likely  to  be  walked   
upon  or  pinched  by  items  placed  on  or  again  st  them. 
When  removing  the  cord  from  a  power  outlet  be  sure   
to  remove  it  by  holding  the  plug  attachment  and  not   

in the cord. 

By pulling on the cord.

DO NOT DAMAGE THE POWER CORD

SAFETY INSTRUCTIONS

版本

第29页  共31页

文件(图 )号

商品劳务号

物品规格

物品类别

物品名称

(图名)

三基音响 科技有 限 公司

  英文说明书

 专业音箱

三基/β3/R4/R8+

101.05.0009.00115

B

Summary of Contents for R4
































Reviews: