11
ISTRUZIONI PER L’USO
I
INSTRUCTIONS FOR USE
EN
TECHNICAL DATA
NOMINAL POWER SUPPLY VOLTAGE
ULTRASONIC FREQUENCY
HEATING POWER
HEATING TEMPERATURE
MAXIMUM TANK CAPACITY
MAXIMUM OPERATING TANK CAPACITY
OVERALL DIMENSIONS
TANK DIMENSIONS
SOCKET CABLE LENGTH (Schuko)
WEIGHT
220-240V ~ 50Hz
40000 Hz
300 W
80 °C max
6.0 l
4.5 l
330x180x310 mm
300x155x150 mm
1.5 m
6.7 kg
WEAR PROTECTIVE MASK AGAINST PHYSICAL AGENTS
CLEANER USE AND CARE
• Place the cleaner on a flat, clean surface that can support its weight.
• Allow for a proper amount of space at the sides of the tank, so that the cooling fans can receive
adequate ventilation.
• Do not operate the unit without fluid in the tank. Ensure that the drain tap is in the closed position. Fill
the tank, ensuring that the fluid is not higher than the max. mark, and that there is a minimum depth
of 7 cm.
• Use only water-based solutions. Do not use any detergent solutions to clean items.
Strong acid or alkaline cleaning solutions will cause corrosion, rust or puncture of tank or
machine body. To overcome this problem, dilute to a mild pH solution.
• Do not drop any item into the tank, as this may cause damage. Always place the items to clean gently
into the basket.
• Do not overlap items while cleaning; always allow plenty of clear space between the items to ensure
efficient cleaning.
• Keep the lid on during use; this will prevent splashes and reduce evaporation of the fluid.
• Always remove the power plug from the socket before filling or emptying the tank.
• Take care when removing items from the cleaning tank, as the fluid is likely to be hot, and displaced
fluid can cause damage.
• When cleaning is complete, empty the tank through the drain tap.
The fluid in the cleaner should be disposed of in an environmentally friendly way and in
compliance with current laws.
• To clean the exterior of the tank, use a dry cloth. Always disconnect the cleaner from the power supply
mains before cleaning it. Never use damp or wet cloths.
