2
20
engi
n
e dis
a
s
sem
bl
y
Chain-side head fixing screw.
Head fixing screws 2.
Head removal 3.
1
2
3
2.1.4 CYLINDER HEAD: UNCOU-
PLING FROM CYLINDER
Five screws fasten the head to the cylinder.
Remove the cylinder head screw
1
on the outside of
the chain-side cylinder head.
Remove the four cylinder head fixing screws
2
, in a
criss-cross pattern. Start with one of the two screws
outside the cylinder head compartment.
Then remove the respective washers.
Lift the cylinder head
3
with one hand and at the
same time with the other hold the chain in tension
thus preventing jams during disassembly.
With the cylinder head lifted a few centimetres,
drop the chain inside the compartment and pull out
the head.
ATTENTION:
should the chain fall inside, place it in
tension before lifting the head.
ATTENTION:
during lifting of the head, pay attention
to the centring bushes.
