3
77
E
N
G
IN
E ASS
E
M
B
LY AN
D CO
NTRO
LS
B
A
C
3.9.2 ASSEMBLY OF KICKSTART
DEVICE
Insert the complete kickstart shaft in its housing
keeping the thin-striped facing outwards and
making sure that the ramp
A
on the kickstart
sleeve is positioned below the ramp
B
bolted
onto the right crankcase (external side).
Turn the spring clockwise until it fits into the
specific hole
C
.
Insert in the slot on the protruding segment of
the secondary shaft: the circlip
18
, the washer
17
, the idler wheel
4
followed by the washer
17
and the circlip
18
as shown in the figure.
Engine side
Positioning of sleeve A below ramp B.
Insertion of kickstart return spring.
Kickstart device unit coupled to the crankcase.