[H ie
Bekamatic SC pg. 15
r eingeben]
[H ier eingeben]
[H ier eingeben]
8)
Correct adjustment of this roller is crucial for
the correct
functioning
of the gate.
9)
The roller must be adjusted in height but also, it’s perpendicularity in
relation to the under beam of the wing.
10)
A support roller installed too high will add undesired friction to the
wing which increases the further the wing is opened.
11)
The height of the support roller must be
adjusted once the wing is approximately
500mm away from the completely open
position.
12)
In this position the support roller should
start to contact the under beam. Adjust
the height as necessary.
Do not adjust the
tensioning system
Support Roller
Rear Roller
Assembly
Front Roller
Assembly Main
Guide Post